If you are looking to purchase the best Solder Sucker but cannot decide on which product is the best to buy we are here to help you!
We handpicked a wide range of products in order to find the top 10 best Solder Sucker available for purchase online.
Generally we go as far as reviewing more than 50+ products available on different places such as Amazon, Ebay, Best Buy or alike, filter them by reviews(we make sure any review about Solder Sucker is real), the proceed to finding the top 10 best products among them.
For example, the best Solder Sucker is engineer ss-02 solder sucker desoldering pump .
If you are in a quick rush you can just go ahead and view the top 3 rated Solder Sucker below.
Top Ten Rated Solder Sucker
More details about the best Solder Sucker available online
The below list provides more in-depth content about features of each product.
- Made in Japan
- Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal)
- Compact design allows easy one handed operation
- Withstands direct contact with soldering iron (350C Max)
- Highest quality construction & components used
- Good little solder sucker,have a good bit of suction,you can just hang onto it and use your thumb to reset and suck
- Simple design allows easy one-handed use,lightweight and compact,suck the solder away easily
- Very sturdy,will worke good to remove existing solder from a circuit board
- Heated up the solder pushed the button and bam,all solder sucked up,super easy to use for desoldering
- A must have excellent solder sucker which fits nicely in your tool box
- Innovative Silicone Nozzle allows closer placement to soldering iron tip (therefore better suction & better solder removal.
- Compact design allows easy one-handed operation. Self-cleaning shaft allows high productivity of continual work without clogging.
- Withstands direct contact with soldering iron (350C Max).
- Made in Japan with highest quality construction & components. High-powered.
- Low maintenance cost, owing to spare tube, only required for replacement.
- The solder wicks can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more
- 1 pieces of no-clean solder wicks, each wick is about 10ft long and 0.1 inch in width, enough quantity and length for your daily needs
- This desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- The desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
- The braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
- 【One-handed solder sucker with powerful suction 】 Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
- 【Desoldering Wick with copper braid】 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
- 【ABS body with non-slip sponge and Nylon nozzle desoldering pump】 The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
- 【3-in-1 Solder Removal Tool】 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
- 【Widely used Solder Remover】 The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.
- AMBIDEXTROUS Simple design construction of the solder sucking vacuum makes it right and left-handed, so everyone can use it easily
- HIGH QUALITY The solder sucker has high quality plastic material, high temperature heat-resisting during long term use. 13 incg long corrosion-resistant plastic body and flexible silicon tube
- EASY TO USE You can use the desoldering wick pump just by Cocking the pump's mechanism by pushing down on the table with your non-soldering hand. Teflon (PTFE) nonstick coating tip and cushioned shock reduction minimize board damage
- DESIGN Designed in color blue and orange plastic, has anti-skid design so it is easy to hold and use. Heavy-duty, Length:13", Diameter: 1.65", Tip Diameter: 0.32".
- SOLDER REMOVAL KIT The solder sucker can be used for both broad and small places, hard to reach areas, can be used to correct all mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.
- 1. Wide range of uses：Desoldering pump is widely used in the electronics and electrical industries, suitable for precision small devices, integrated circuit pins, home appliance repairs, digital repairs, etc., efficient and portable to remove waste tin residue.
- 2. Ergonomic design: Desolder pump adopts aluminum alloy shell, the operation is not slippery, the grip is comfortable, and the use is convenient.
- 3. High-quality suction nozzle: Good solvent resistance, lightweight design, easy to carry, suitable for long-term use, and improve work efficiency.
- 4. Strong suction power: Solder sucker desoldering pump adopts stainless steel push rod, internal spring adopts back pull design, instant suction power is strong.
- 5. Press lightly and quickly rebound: Desoldering suction pump adopts high-efficiency tin scraping method, which is easy to remove tin debris from the suction nozzle and not easy to block. If you have any product questions, you can contact us at any time.
- Easy-to-use adjustable temperature control built into the handle
- Easy-to-clean solder recovery chamber minimizes maintenance and reduces waste
- Fast release tool for the quick-change nozzle system
- Closed-loop sensor integrated heating system for improved thermal performanc
- Compatible with lead-free solders
- This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice.
- This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
- Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely.
- This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously. You can desolder joints after joints without your hands feeling uncomfortably hot.
- Choose YIHUA with Confidence - Our US-exclusive 12-month manufacturer warranty will apply to your purchase. Plus, our team is providing professional assistance 24/7 on Amazon. NOTE: This model only works on 110-127V with its USA plug. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.
- This Complete Kit Includes: 75-Watt Soldering Station (60 Watts for Soldering Iron &15 Watts for Mini Mother Board in Soldering Iron), Top Mount Soldering Iron Holder, Side Mount Solder Roll Holder, Brass Sponge Tip Cleaner with Supply of Cleaning Flux, Wet Sponge, 5 Extra Soldering Tips, Anti-Static Grounding Wire for PCB Board, a Mini Mag Lamp & 4 Helping Hands (these are Detachable), Solder Sucker, 50g Roll of 60/40 Solder & Pinpoint Tweezers.
- Soldering Iron with Ergonomic Grip Specifications: 60 Watt Output (60 Watt Heating Element) - Temperature Range 194°F ~ 896°F/90°C ~ 480°C, Temperature Stability: ±3.6°F/2.0°C (Static), Working Environment: 32°F ~ 104°F/ 0°C ~ 40°C, Storage Environment: -4°F ~ 176°F/ -20°C ~ 80°C, Storage Humidity: 35% ~ 45% - AC Powered - 110V/60 Hz - NO 220V Available. 57 Inch 100% Silicone Cord (Virtually NO Memory) from Tip of Soldering Iron to the Main Unit & 55 Inch Power Cord from Wall Plug to Main Unit.
- Features: ESD Safe, Anti-Static Designed, Adjustable Sleep Timer (0, 5, 10 & 30 Minutes), Centigrade to Fahrenheit Programmable, Blue LED Readout on Dual Control Panels (Set Temp and Real Temp), Digital Temperature Calibration Function, 3 Preset Memory Functions, PSD (Proportional-Integral-Derivative) Technology often referred to as Magic Temperature Compensation Technology.
- Although The 3060-PRO was Mainly Manufactured for the Advanced User as well as the Expert, the Features of this Soldering Station are Simple Enough to Understand and Program that an Amateur or Beginner will have No Problem Using this Unit. This Soldering Station is one of the Finest Units that X-Tronic makes, and It Will Definitely Exceed your Expectations with its Quality and Durability compared to Any Other Soldering Station in its Class.
- ALL X-Tronic Products come with a 30-Day Unconditional Money Back Guaranty which also includes a 3-Year Warranty with the Cost of Parts and Labor Included. PLEASE SCROLL DOWN THIS PAGE FOR MANY MORE PHOTOS & INFORMATION ON THIS PRODUCT!
If the above list of the best Solder Sucker does not statisfy you we are also providing a full list of available ones on amazon.
VIEW THE FULL LIST ON AMAZON